Frames & Poles

Rotor Arm Pivot SS Heavy Duty ~ 60cm in length, 8mm Ø Stainless Steel.
Used to connect a Windsock with Bridle Harness to the pole.
Replaces the need for a more expensive Windsock frame. Incredibly durable & maintenance-free.

900mm Ø diameter Single Windsock Frame - Wind Direction Indicator - designed to comply with CASA MOS 139 for Aerodromes (non-illuminated): all components stainless steel, complete with machined stainless steel spigot with 1 inch BSP tapered thread, 2 sealed bearings, stainless steel Windsock rim and cross members.

450mm Ø diameter Dual Windsock Frame (Dual Frame extension) 400mm : all components stainless steel, complete with machined stainless steel spigot with 1 inch BSP tapered thread, 2 sealed bearings, stainless steel Windsock rim and cross members.

Structure Mounted Windsock Assembly consisting of 3000 Swivelpole Stanchion Mounted: base pole section 1050mm DN50, top section 1750mm DN40, both pole sections Hot-Dipped Galvanised Steel; pole sections inserted into steel zinc aluminium coated Maxis Joint. Pole and Joints comply with all relevant Australian Standards. Refer to the additional Product Data Sheet for footing information in different Wind Regions.

Base Mounted Windsock Assembly consisting of 5000mm Swivelpole Base Mounted Pole: base pole section 900mm DN65, base top section 3800mm DN50, pole sections inserted into steel zinc aluminium coated Maxis Joint. Pole and Joints comply with all relevant Australian Standards. Refer to the additional Product Data Sheet for footing information in different Wind Regions

FR-04 Stainless steel adaptor for top of DN40 Pole (to suit Pole OD Ø 48.27mm) C/W 1 inch
BSP thread to receive to receive spindle of FR Series Single & Dual Frames
Adaptor is fitted with 4 grub screws to enable centred fastening.

FR-04 Stainless steel adaptor for top of DN50 Pole (ID Ø 60.3mm) C/W 1 inch
BSP thread to receive to receive spindle of FR Series Single & Dual Frames
Adaptor is fitted with 4 grub screws to enable centred fastening.

FR-04 Stainless steel custom adaptor for top of Pole DN80, OD Ø 88.9mm, ID Ø ~80mm, C/W 1 inch BSP thread to receive spindle of FR Series Single & Dual Frames

Length of Mounting Adaptor is 140mm and is fitted with 4 grub screws to enable centred fastening.