High Visibility Polyester 300D Windsock C/W SS Eyelets + Reflective on Tail for Night Viewing

Heavy Duty WeatherMaxLT Windsock with C/W SS Eyelets + Reflective on Tail for Night Viewing

Extra Heavy Duty Sunbrella Windsock C/W SS Eyelets + Reflective on Tail for Night Viewing

CASA Standard Aviation Windsock in Heavy Duty WeatherMax80 C/W SS Eyelets + Reflective on Tail for Night Viewing

CASA Standard Helicopter Windsock in Heavy Duty WeatherMax80 C/W SS Eyelets + Reflective on Tail for Night Viewing

High Visibility Polyester 300D Windsock with Anti-Static Properties C/W SS Eyelets + Reflective on Tail

Printed Advertising Windsock with Customer Logo and Design C/W SS Eyelets + Reflective on Tail for Night Viewing

Rotor Arm Pivot SS Heavy Duty ~ 60cm in length, 8mm Ø Stainless Steel.
Used to connect a Windsock with Bridle Harness to the pole.
Replaces the need for a more expensive Windsock frame. Incredibly durable & maintenance-free.

900mm Ø diameter Single Windsock Frame - Wind Direction Indicator - designed to comply with CASA MOS 139 for Aerodromes (non-illuminated): all components stainless steel, complete with machined stainless steel spigot with 1 inch BSP tapered thread, 2 sealed bearings, stainless steel Windsock rim and cross members.

450mm Ø diameter Dual Windsock Frame (Dual Frame extension) 400mm : all components stainless steel, complete with machined stainless steel spigot with 1 inch BSP tapered thread, 2 sealed bearings, stainless steel Windsock rim and cross members.

Structure Mounted Windsock Assembly consisting of 3000 Swivelpole Stanchion Mounted: base pole section 1050mm DN50, top section 1750mm DN40, both pole sections Hot-Dipped Galvanised Steel; pole sections inserted into steel zinc aluminium coated Maxis Joint. Pole and Joints comply with all relevant Australian Standards. Refer to the additional Product Data Sheet for footing information in different Wind Regions.

Base Mounted Windsock Assembly consisting of 5000mm Swivelpole Base Mounted Pole: base pole section 900mm DN65, base top section 3800mm DN50, pole sections inserted into steel zinc aluminium coated Maxis Joint. Pole and Joints comply with all relevant Australian Standards. Refer to the additional Product Data Sheet for footing information in different Wind Regions

Mobile Windsock Assembly consisting of: 4-6m G5 Series Mid Hinging Pole - pole outside diameter Ø 60.3mm (50NB), Aluminium and steel with HDG finish; Pop up base suitable for Wind Regions A + B, or A + B + C + D in Australia. Highlight portable - either by forklift or, if emptied, by hand

Windsock sizes - 900mm to 1200mm in length where a Rotor Arm Pivot is used or up to 1800mm if a fixed Windsock Frame is in place

Complete HD Commercial & Industrial Windsock Solution. Engineered 6m - 10m mid-hinging counterweighted galvanised steel pole with heavy-duty Windsock on Rotor Arm Pivot or Single/ Dual Stainless Steel Frame. Available with Sunbrella, High Visibility Neon or Anti-Static Windsock. Rated to Wind Region D (Cyclonic) per AS/NZS 1170.2. Ground-level servicing — no working-at-heights permits required. Structural Engineering Certificate available on request.